谭久彬——超精密光电仪器工程专家

发明专利：

1. MICRO-CAVITY MEASURING EQUIPMENT METHOD BASED ON DOUBLE OPTICAL FIBER COUPLING, 美国专利号：US7，733，477 B2（发明人：谭久彬、崔继文）

2. 超精密回转基准空间误差自分离方法与装置, ZL200410001193.9（发明人：谭久彬、赵维谦等）

3. 激光透、反组合监测补偿式圆柱度仪直线运动基准装置, ZL200410062208.2（发明人：谭久彬、赵维谦等）

4. 一种可分离圆柱度仪基准误差的圆柱度测量方法及装置, ZL200510007217.6（发明人：谭久彬、薛梓等）

5. 基于动态差动补偿方法的二维光电自准直装置和测量方法, ZL200510072253.0（发明人：谭久彬、敖磊等）

6. 混合式螺旋槽动静压气体复合圆柱轴承, ZL200510009639.7（发明人：谭久彬、姚绍明等）

7. 分立式人字槽动静压气体复合圆柱轴承, ZL200510009636.3（发明人：谭久彬、姚绍明等）

8. 双特征复合节流静压气体圆柱轴承, ZL200510009741.7（发明人：谭久彬、姚绍明等）

9. 复合节流静压气体圆柱轴承, ZL200510009747.4（发明人：谭久彬、姚绍明等）

10. 开度无级调节的非接触式气体换向阀, ZL200510009630.6（发明人：谭久彬、姚绍明等）

11. 带有电磁阻尼器的空气弹簧隔振基础, ZL200510009631.0（发明人：谭久彬、姚绍明等）

12. 超精密回转轴与激光直写机直写光轴空间对准方法, ZL200510076827.1（发明人：谭久彬、刘俭等）

13. 双光纤耦合接触式微测量力瞄准传感器, ZL200510072254.5（发明人：谭久彬，崔继文）

14. 基于双光纤耦合的微小内腔体尺寸测量装置与方法, ZL200510102478.6（发明人：谭久彬、崔继文等）

15. 漂移量靶标反馈控制的长距离二维光电自准直装置和方法 , ZL200510089852.3（发明人：谭久彬、敖磊等）

16. 漂移量靶标反馈的长距离二维偏振光电自准直装置和方法, ZL200510117263.1（发明人：谭久彬、敖磊等）

17. 基于光程倍增补偿方法的二维光电自准直装置和测量方法, ZL200510077456.9（发明人：谭久彬、敖磊等）

18. 麦克斯韦微半球阵列反射器, ZL200510090287.2（发明人：谭久彬、陈浩）

19. 球对称梯度折射率微珠阵列反射器, ZL200510090286.8（发明人：谭久彬、陈浩）

20. 基于谐波共振方法的并行激光直接写入方法与装置, ZL200610150983.2（发明人：谭久彬、单明广等）

21. 基于热电致冷器的双纵横激光器稳频方法与装置, ZL200610010146.x（发明人：谭久彬、胡鹏程等）

22. 多频同步调制激光测距方法与装置, ZL200610072990.5（发明人：谭久彬、刘思远等）

23. 基于微光学阵列多点曝光的极坐标直接写入方法与装置, ZL200610010129.6（发明人：谭久彬、单明广等）

24. 具有圆环金属网栅结构的电磁屏蔽光学窗, ZL200610010066.4（发明人：谭久彬、陆振刚等）

25. 三维超分辨共焦阵列扫描显微探测方法及装置, ZL200510007218.0（发明人：谭久彬、黄向东）

26. 基于磁-磁变换的纳米精度大输出力微驱动装置与方法, ZL200510002553.1（发明人：谭久彬、王雷等）

27. 减小外差干涉非线性误差一次谐波分量的方法与装置, ZL200610010189.8（发明人：谭久彬、陈洪芳等）

28. 极坐标激光直写系统单刻线触发解析对准方法, ZL200510077455.4（发明人：刘俭、谭久彬等）

29. 带有万向均载机构的调整垫铁, ZL200510009628.9（发明人：谭久彬、姚绍明等）

30. 带有磁悬浮单元的空气弹簧隔振基础, ZL200610150808.3（发明人：谭久彬、刘彦等）

31. 折/衍混合长焦深成像透镜的消色差方法, ZL200710072593.2（发明人：谭久彬、张慧）

32. 一种基于自身特征参照的圆柱度仪基准间误差分离方法, ZL200610056957.3（发明人：谭久彬、黄景志等）

33. 一种双偏置参数圆轮廓测量模型的偏置误差分离方法, ZL200810136908.X（发明人：谭久彬、黄景志）

34. 复色超分辨差动共焦测量方法与装置, ZL200710301423.7（发明人：谭久彬、刘俭）

35. 双位相复合超分辨光瞳滤波方法与装置, ZL200510130464.5（发明人：谭久彬、刘俭等）

36. 一种具有双层方格金属网栅结构的电磁屏蔽光学窗, ZL200810063988.0（发明人：谭久彬、陆振刚）

37. 带有气体润滑单元的空气弹簧隔振基础, ZL200610150809.8（发明人：谭久彬、刘彦等）

38. 一种单（双）翼式气/液两相复合回转基准方法与装置, ZL200810136907.5（发明人：谭久彬、黄景志等）

39. 一种具有双层圆环金属网栅结构的电磁屏蔽光学窗, ZL200810063987.6（发明人：谭久彬、陆振刚）

40. 角十字扇形复振幅光瞳滤波器, ZL200810064991.4（发明人：谭久彬、刘涛等）

41. 基于差动电磁作动器的空气弹簧超低频隔振方法与装置, ZL200610150810.0（发明人：谭久彬、刘彦等）

42. 漏光型角十字扇形复振幅光瞳滤波器, ZL200810136909.4（发明人：刘俭、谭久彬等）

43. 基于重力平衡的卧式气/气两相复合直线基准方法与装置, ZL200810137530.5（发明人：谭久彬、黄景志等）

44. 基于移相干涉的二次共焦测量方法与装置, ZL200810097210.1（发明人：谭久彬、刘俭）

45. 基于光功率精确分离的纵向塞曼激光器稳频方法与装置, ZL200810137081.4（发明人：谭久彬、胡鹏程等）

46. 基于双侧对称阻尼的静压气浮导轨, ZL200810064747.8（发明人：谭久彬、崔俊宁等）

47. 一种立式直线基准方法与装置, ZL200810137529.2（发明人：谭久彬、黄景志等）

48. 一种气/固两相复合回转基准方法与装置, ZL200810136906.0（发明人：谭久彬、黄景志等）

49. 基于外扶式气/气两相复合的立式直线基准方法与装置, ZL200810137531.X（发明人：谭久彬、黄景志等）

50. 基于偏振态调控与波长合成的双频激光测距方法与装置, ZL200910071861.8（发明人：谭久彬、胡鹏程等）

51. 基于球形气浮轴的非球面子孔径拼接测量装置, ZL200910071665.0（发明人：谭久彬、王伟波等）

52. 嵌入式共基面二维平衡双驱双工件台定位系统, ZL200810137566.3（发明人：谭久彬、张山等）

53. 超分辨复色差动共焦测量装置及方法, ZL200810147049.4（发明人：刘俭、谭久彬）

54. 长焦深超分辨二次共焦测量装置, ZL200810212341.X（发明人：刘俭、谭久彬等）

55. 双光束干涉可调增益激光写入滤波方法与装置, ZL200810147050.7（发明人：刘俭、谭久彬）

56. 基于Nipkow盘的衍射多光谱成像装置与方法, ZL200910071681.X（发明人：刘俭、刘忠源、谭久彬等）

57. 具有高空间分辨力的整形环形光束式差动共焦传感器, ZL200410001107.4（发明人：赵维谦、谭久彬等）

58. 整形环形光三差动共焦显微镜, ZL200410074459.2（发明人：赵维谦、谭久彬等）

59. 具有高空间分辨力的差动共焦扫描检测方法, ZL200410006359.6（发明人：赵维谦、谭久彬等）

60. 单转位圆度误差分离方法, ZL200510002287.2（发明人：赵维谦、谭久彬）

61. 光束漂移量快速反馈控制式高精度激光准直方法及装置, ZL200410033610.8（发明人：赵维谦、谭久彬）

62. 三差动共焦显微三维超分辨成像方法, ZL200410090774.4（发明人：赵维谦、谭久彬等）

63. 三差动共焦显微成像方法与装置, ZL200410073652.4（发明人：赵维谦、谭久彬等）

论文专著：

谭久彬教授共发表学术论文200余篇, 其中SCI检索40篇, EI检索130篇, ISTP检索44篇；论文他引500余次；出版专著一部。

出版专著：

1、《精密测量中的误差补偿技术》哈尔滨工业大学出版社 1995

与博士生合作发表论文：

1. Tao Liu, Jiubin Tan, and Jian Liu. Spoke wheel filtering strategy for on-axis flattop shaping. Optics Express, 2010. 18(3): 2822-2835 (EI检索: 20100612700563；SCI检索IDS 号: 559AD, 2008年IF: 3.880)

2. Wang Lei, Tan Jiubin, Zhang Shan. A giant magnetostrictive actuator based on use of permanent magnet. International Journal of Advanced Manufacturing Technology. 2010. 46(9-12): 893-897(EI检索: 20100912740104; SCI检索IDS号: 552XI, 2008年IF: 0.743 )

3. Liu Yongmeng, Tan Jiubin, Liu Jian. Use of a genetic algorithm with a penalty strategy to optimize optical communication window mesh. Pure and Applied Optics. 2009, 11, 045403.1-5(EI检索: 20094712477822 ; SCI检索IDS号: 414UI, 2007年IF: 1.732)

4. Liu Jian, Tan Jiubin, Zhao Chenguang, Ge Zhenggui, Zhang Daqing. Phase-shift resolving confocal microscopy with high axial resolution, wide range and reflectance disturbance resistibility. Optics Express. 2009. 17(18): 16281-16290(EI检索: 20093712307214, SCI检索IDS号: 494AO, 2008年IF: 3.880)

5. Liu Jian, Tan Jiubin, Hu bin, Wang Yuhang. Improved differential confocal microscopy with ultrahigh signal-to-noise ratio and reflectance disturbance resistibility. Applied Optics. 2009. 48(32):6195-6201(EI检索: 20100112615694; SCI检索IDS号: 517WM, 2008年IF: 1.763)

6. Lin Jie, Tan Jiubin, Liu Jian, Liu Shutian. Rigorous electromagnetic analysis of two dimensional micro-axicon by boundary integral equations. Optics Express. 2009, 17(3): 1466-1471(EI检索: 20090711910667; SCI检索IDS号: 408JX, 2008年IF: 3.880)

7. Tan Jiubin, Jin Zhanlei. Depth of focus estimation based on exposure dose distribution. Optics Communication. 2008, 281(8): 2233-2237(EI检索: 20080911123353; SCI检索 IDS号: 282KH, 2007年IF: 1.314)

8. Tan Jiubin, Shan Mingguang, Zhao Chenguang, Liu Jian. Design and fabrication of diffractive microlens arrays with continuous relief for parallel laser direct writing. Applied Optics. 2008, 47(10): 1430-1433(EI检索: 20083311455183; SCI检索 IDS号: 293OU, 2007年IF: 1.701)

9. Tan Jiubin, Liu Yan, Wang Lei, Yang Wenguo. Identification of modal parameters of a system with high damping and closely spaced modes by combining continuous wavelet transform with pattern search. Mechanical Systems and Signal Processing. 2008, 22(5): 1055-1060(EI检索:20081511198117; SCI检索IDS号: 297BO, 2007年IF: 1.333)

10. Liu Jian, Tan Jiubin, Zhao Chenguang. Convex objective function-based design method developed for minimizing side lobe. Applied Optics. 2008, 47(22): 4061-4067(EI检索: 20084311659322; SCI检索IDS号: 347CT, 2007年IF: 1.701)

11. Liu Jian, Tan Jiubin, Wang Yanchao. Synthetic complex superresolving pupil filter based on double-beam phase modulation. Applied Optics. 2008, 47(21): 3803-3807(EI检索: 20083911590208; SCI检索IDS号: 337EW, 2007年IF: 1.701)

12. Tan Jiubin, Liu Yongmeng. Optimization of optical communication window mesh through full-wave analysis of periodic mesh. Optics Communication. 2008, 281(19): 4835-4839(EI检索: 20083511483540; SCI检索IDS号: 351PW, 2007年IF: 1.314)

13. Lu Zhengang, Tan Jiubin. Analysis of transmitting characteristics of high-transparency double-layer metallic meshes with submillimeter period using an analytical model. Applied Optics. 2008, 47(29): 5519-5526(EI检索: 20090911933243; SCI检索IDS号: 368AN, 2007年IF: 1.701)

14. Tan Jiubin, Shan Mingguang, Liu Jian, Zhang Hui, Zhao Chenguang. Model analysis of effect of diffraction focus characteristics of microlens arrays on parallel laser direct writing quality. Optics Communications. 2007, 277(2): 237-240(EI检索: 20073110744229; SCI检索IDS号: 243IX, 2007年IF: 1.314)

15. Tan Jiubin, Ao Lei, Cui Jiwen, Kang Wenjing. Further improvement of edge location accuracy of charge-coupled-device laser autocollimators using orthogonal Fourier-Mellin moments. Optical Engineering. 2007, 46(5): 1-12(EI检索: 20073010706787; SCI检索IDS号: 186XW, 2007年IF: 0.757)

16. Tan Jiubin, Lu Zhengang. Contiguous metallic rings: an inductive mesh with high transmissivity, strong electromagnetic shielding, and uniformly distributed stray light. Optics Express. 2007, 15(3): 790-796(EI检索: 20070710420964; SCI检索IDS号: 142WS, 2007年IF: 3.709)

17. Tan Jiubin, Lu Zhengang, Liu Jian, Jin Peng, Wang Yanchao. Analysis of Fraunhofer diffractive characteristics of a tilted metallic mesh for its effect on optical measurement. Measurement Science and Technology. 2007, 18(6): 1703-1709(EI检索: 20072010599330; SCI检索IDS号: 169JU, 2007年IF: 1.297)

18. Liu Siyuan, Tan Jiubin, Hou Binke. Multicycle synchronous digital phase measurement used to further improve phase-shift laser range finding. Measurement Science and Technology. 2007, 18(6): 1756-1762(EI检索: 20072010599338; SCI检索IDS号: 169JU, 2007年IF: 1.297)

19. Shan Mingguang, Tan Jiubin. Modeling focusing characteristics of low F-number diffractive optical elements with continuous relief fabricated by laser direct writing. Optics Express. 2007, 15(25): 17032-17037(EI检索: 20075110985049; SCI检索IDS号: 240YT, 2007年IF: 3.709)

20. Huang Xiangdong, Tan Jiubin. A new super-resolution element for array confocal microscopy. Measurement Science and Technology. 2006, 17(3): 601-604(EI检索: 2006069683945; SCI检索IDS号: 024WN, 2006年IF: 1.228)

21. Zhao Weiqian, Xue Zi, Tan Jiubin, Wang Zhibo. SSEST: A new approach to higher accuracy cylindricity measuring instrument. International Journal of Machine Tools and Manufacture. 2006, 46(14): 1869-1878(EI检索: 20063210057386, SCI检索IDS号: 093AS, 2006年IF: 1.184)

22. Zhao Weiqian, Tan Jiubin, Qiu Lirong, Zou Limin. A new laser heterodyne confocal probe for ultraprecision measurement of discontinuous contours. Measurement Science and Technology. 2005, 16(2): 497-504 (EI检索: 2005098867484; SCI检索IDS号: 899JC, 2005年IF: 1.079)

23. Zhao Weiqian, Tan Jiubin, Qiu Lirong, Zou Limin, Cui Jiwen, Shi Zi. Enhancing laser beam directional stability by single-mode optical fiber and feedback control of drifts. Review of Scientific Instruments. 2005, 76(3): 1-3(EI检索: 2005179055555; SCI检索IDS号: 904WV, 2005年IF: 1.235)

24. Zhao Weiqian, Li Qi, Qiu Lirong, Tan Jiubin, Wang Qi. An approach to achieve lateral superresolution for small probe confocal measurement system and its element. Optik. 2005, 116(12): 557-562(EI检索: 2005469472999; SCI检索IDS号: 992HM, 2005年IF: 0.395)

25. Zhao Weiqian, Tan Jiubin, Xue Zi, Fu Shaoliang. SEST: A new error separation technique for ultra-high precision roundness measurement. Measurement Science and Technology. 2005, 16(3): 833-841(EI检索: 2005379353649; SCI检索IDS号: 908DC, 2005年IF: 1.079)

26. Zhao Weiqian, Tan Jiubin, Qiu Lirong, Jin Peng. SABCMS, a new approach to higher lateral resolution of laser probe measurement system. Sensors and Actuators. 2005, 120(1): 17-25(EI检索: 2005189072747; SCI检索IDS号: 921NG, 2005年IF: 1.363)

27. Zhao Weiqian, Tan Jiubin, Qiu Lirong. Improvement of confocal microscope performance by shaped annular beam and heterodyne confocal techniques. Optik. 2005, 116(3): 111-117(EI检索: 2005149017424; SCI检索IDS号: 923RF, 2005年IF: 0.395)

28. Cui Jiwen, Tan Jiubin. A circle contour measurement technique based on randomized hough transform using gradient information. Key Engineering Materials. 2005, 295-296: 277-282(EI检索: 20072310635087, SCI检索IDS号: BCW90, 2005年IF: 0.138)

29. Zhao Weiqian, Tan Jiubin, Xue Zi, Feng Zhengde. A high precision circuit based on digital techniques for roundness measurement. Key Engineering Materials. 2005, 295-296: 271-276(EI检索: 20072310635086, SCI检索IDS号: BCW90, 2005年IF: 0.138)

30. Tan Jiubin, Zhang Jie. An optical system incorporating gradient-index lens for confocal inspection. Optics and Lasers in Engineering. 2004, 42(2): 233-240(EI检索: 2004208160493; SCI检索IDS号: 822AS, 2004年IF: 0.935)

31. Zhao Weiqian, Tan Jiubin, Qiu Lirong. Bipolar absolute differential confocal approach to higher spatial resolution. Optics Express. 2004, 12(21): 5013-5021(EI检索: 2004508711884; SCI检索IDS号: 863EP, 2004年IF: 3.797)

32. Zhao Weiqian, Tan Jiubin, Qiu Lirong. Tri-heterodyne confocal microscope with axial superresolution and higher SNR. Optics Express. 2004, 12(21): 5191-5197(EI检索: 2004508711903; SCI检索IDS号: 863EP, 2004年IF: 3.797)

33. Tan Jiubin, Zhang Jie. Differential confocal optical system using gradient-index lenses. Optical Engineering. 2003, 42(10): 2868-2871(EI检索: 2003507780333; SCI检索IDS号: 733CM, 2003年IF: 0.877)

34. Tan Jiubin, Zhang Jie. A small probe with a gradient index lens for confocal measurement. Sensors and Actuators A-Physical. 2003, 104(2): 121-126(EI检索: 2003167440032; SCI检索IDS号: 664AC, 2003年IF: 1.422)

35. Cui Tianxiang, Huang Xiangdong, Tan Jiubin, Sun Bing, Huang Hongbin. A dynamic method used to recognise flame burning status in the boiler. Journal of Infrared and Millimeter Waves. 2003, 22(3): 217-219(EI检索: 2003397651614; SCI检索IDS号: 696FR, 2003年IF: 0.160 )

36. Tan Jiubin, Wang Fusheng. Theoretical analysis and property study of optical focus detection based on differential confocal microscopy. Measurement Science and Technology. 2002, 13(8): 1289-1293(EI检索: 2002367071139; SCI检索IDS号: 588NG, 2002年IF: 0.845)

37. Yao Shaoming, Tan Jiubin. Incompressible and analytical study on a basic model of a complex journal gas bearing. Tribology Transactions. 2006, 49(1): 92-95(SCI检索IDS号: 016UX, 2006年IF: 0.507)

38. Yao Shaoming, Tan Jiubin. Incompressible and analytical study on an out-pump type complex thrust gas bearing. Tribology Transactions. 2006, 49(1): 96-101(SCI检索IDS号: 016UX, 2006年IF: 0.507)

39. Yao Shaoming, Tan Jiubin. Incompressible and analytical study on load-carrying capacity of a complex thrust gas bearing. Tribology Transactions. 2006, 49(1): 102-107(SCI检索IDS号: 016UX, 2006年IF: 0.507)

40. Jin Peng, Akira Yamaguchi, Fumika Asari Oi, Shigeki Matsuo, Tan Jiubin, Hiroaki Misawa. Glucose sensing based on interdigitated array microelectrode. Analytical Sciences. 2001, 17(7): 841-846(SCI检索IDS号: 456PR, 2001年IF: 0.916)

41. Cui Jiwen, Tan Jiubin, Shi Qian. Measurement method for micro-cavity based on super-resolution restoration. Proceedings of the 4th International Conference on Image and Graphics. 2007, 139-142(EI检索: 20083011396631; ISTP检索: BGT94)

42. Jin Peng, Kyle Jiang, Tan Jiubin, Lancaster M. J. Optimized SU-8 UV-lithographyical process for a Ka-band filter fabrication. SPIE: Third International Conference on Experimental Mechanics and Third Conference of the Asian Committee on Experimental Mechanics. 2005, 5852(1): 352-356(EI检索: 2005509540169; ISTP检索: BCL69)

43. Zhong Zhi, Tan Jiubin, Chen Hongfang, Ma Hongwen. The effect on doppler frequency shift by measurement prism 3-dimension motion. SPIE: 20th Congress of the International-Commission-for-Optics. 2005, 6027: 602721 (EI检索: 2006139786418; ISTP检索: BDT88)

44. Cui Jiwen, Tan Jiubin, Kang Wenjing, Ao Lei. Variable window and variant threshold segmentation algorithm based on light field intensity. SPIE: 20th Congress of the International-Commission-for-Optics. 2005, 6027: 60271F(EI检索: 2006139786396; ISTP检索: BDT88)

45. Tan Jiubin, Zhang Jie. Novel fiber optical scanning microscope. SPIE: Optical Scanning 2002 Conference. 2002, 4773: 152-156(EI检索: 2002477222091; ISTP检索: BV08S)

46. Zhang Jianhuan, Tan Jiubin. Measurement slope of with differential confocal microscope. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 2: 452-456(EI检索: 2003427680160; ISTP检索: BW03K)

47. Tan Jiubin, Zhang Jie, Hu Yanqing. A confocal probe with gradient index lens. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 2: 327-332(EI检索: 2003427680135; ISTP检索: BW03K)

48. Yang Yafei, Tan Jiubin. Initial alignment of inertial navigation system. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 1: 596-602(EI检索: 2003427680027; ISTP检索: BW02V)

49. Yang Yafei, Tan Jiubin. Transfer alignment methods of inertial navigation system. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 1: 626-630(EI检索: 2003427680033; ISTP检索: BW02V)

50. Zhao Weiqian, Xue Zi, Yang Wenguo, Tan Jiubin. Reverse error separation method for the position error between references during the measurement of cylindricity. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 3: 90-96(EI检索: 2003427680248; ISTP检索: BW04Z)

51. Cui Jiwen, Qiu Lirong, Jin Guoliang, Tan Jiubin. A new method used for measuring the parameter of elastic thin-neck based on CCD aiming. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 2: 799-803(EI检索: 2003427680234; ISTP检索: BW03K)

52. Wang Fusheng, Jia Yuhui, Tan Jiubin. Conceptual framework for intelligent residential community based on embedded internet. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 2: 719-723(EI检索: 2003427680217; ISTP检索: BW03K)

53. Xiong Mudi, Yang Wenguo, Tan Jiubin. Study of high accuracy spindle servo control base on neutral network. Proceedings of the Second International Symposium on Instrumentation Science and Technology. 2002, 1: 688-691(EI检索: 2003427680046; ISTP检索: BW02V)

54. Tan Jiubin, Zhao Weiqian, Yang Wengou. Development of research on super-precision measurement techniques for circle and cylindrical contour. SPIE: Conference on Process Control and Inspection for Industry. 2000, 4222: 21-26(EI检索: 2001195585331; ISTP检索: BR66X)

55. Wang Fusheng, Tan Jiubin, Zhao Weiqian. Optical probe using differential confocal technique for surface profile. SPIE: Conference on Process Control and Inspection for Industry. 2000, 4222: 194-197 (EI检索: 2001195585366; ISTP检索 : BR66X)

56. Wang Weibo, Tan Jiubin, Zhu Liming, Ge Zhenggui. Alignment Error Model of Subaperture Stitching Interferometry for Aspheric Surface Based on Wavefront Aberrations. Proc. of SPIE. 2009. 7283 72830F-1～5(EI检索: 20093812313266)

57. Lang Zhiguo, Tan Jiubin. Improvement of calculation efficiency for locating diffraction spot of phase plate with correlation function fitting extreme method. Optics and Precision Engineering. 2009. 17(10):2392-2400(EI检索: 20094912530500)

58. 崔继文, 谭久彬, 刘洋. 基于双光纤耦合的微深孔测量方法. 红外与激光工程. 2009, 38（1）：106-109(EI检索: 20092212098422)

59. 郎志国, 谭久彬. 由相关函数拟合极值法提高位相板衍射光斑定位的计算效率. 光学精密工程. 2009. 17(10): 2392-2400(EI检索: )

60. 王雷, 谭久彬, 黄景志, 程陶. 基于圆度评定方法的气浮轴系回转误差分析. 红外与激光工程. 2009.38(3): 441-444（EI检索: 20094112367149）

61. 胡鹏程, 谭久彬, 王琪, 李婧, 张培. 基于非对称热结构的激光热稳频系统. 红外与激光工程. 2009. 38(2):261-266(EI检索: 20094212378006)

62. 黄景志, 谭久彬, 谷伟. 光学圆柱几何形状的精确测量和误差消除. 光电子•激光. 2009, 20(9): 1174~1180 (EI检索: 20094512432716)

63. Huang Jingzhi, Tan Jiubin. Effect of probe offset on ultra-precision measurement of circular profile. 5th International Symposium on Instrumentation Science and Technology, Shenyang, China, 2008. Proceedings of SPIE, 2008, 7133: 71330G1~71330G6 (EI检索: 20091311978237)

64. Tan Jiubin, Ao Lei, Cui Jiwen, Kang Wenjing, Liu Dandan. Subpixel edge location based on orthogonal Fourier-Mellin moments. Image and Vision Computing, 2008, 26(4): 563-569(EI检索: 20080411053324)

65. 胡鹏程, 谭久彬, 杨宏兴, 闫磊. 一种基于控制点偏移修正的纵向塞曼稳频方法与系统. 光电子•激光. 2008, 19(1): 46-49(EI检索: 20081111147279)

66. 张慧, 丁雪梅, 谭久彬. 折-衍混合长焦深光学元件的焦深特性. 光学精密工程. 2008, 16(1): 64-70(EI检索: 20081011136121)

67. 金占雷, 谭久彬, 王雷, 刘玉涛. 基于S曲线光强控制的激光直写接头光滑闭合方法. 光电子•激光. 2008, 19(5): 647-651(EI检索: 20082411315001)

68. 金占雷, 谭久彬, 张山, 王雷, 吕云飞. 激光直写中S曲线光强控制模型的参数优化.光学精密工程. 2008, 16(4): 570-578(EI检索: 20082111273383)

69. 刘彦, 谭久彬, 王雷, 谭志波. 辅助气室连通的空气弹簧隔振系统隔振特性研究. 振动与冲击. 2008, 27(4): 98-100(EI检索: 20082311303719)

70. 刘俭, 谭久彬, 赵晨光. 基于特征谱信号抑制的气膜刚度测量技术. 光电子•激光. 2008, 19(7): 938-941(EI检索: 20083511493973)

71. Hu Pengcheng, Tan Jiubin, Yan Lei, Fu Haijin. Preheating method for frequency stabilized Zeman He-Ne laser based on temperature trajectory control. Optics and Precision Engineering. 2008, 16(6): 1009-1017(EI检索: 20082911385304)

72. 陈浩, 谭久彬. 一种改进的TRIAD飞行器姿态确定方法. 系统仿真学报. 2008, 20(8): 2101-2104 (EI检索: 20082011257269)

73. Chen Hao, Tan Jiubin. Target tracking based on second-order converted measurement Kalman filter. Opto-Electronic Engineering. 2008, 35(4): 6-11 (EI检索: 20082111273641)

74. 张山, 谭久彬, 王雷, 金占雷. 直角坐标激光直写的动态曝光模型. 光学精密工程. 2008, 6(8): 1354-1360(EI检索: 20083811573039)

75. 杨宏兴, 谭久彬, 胡鹏程, 付海金. 基于实时监测的激光外差干涉仪闲区误差自动补偿. 光电子•激光. 2008, 19(7): 934-937(EI检索: 20083511493972)

76. 乔玉晶, 谭久彬, 王伟波. 非球面拼接测量中偏置误差修正模型. 光电子•激光. 2008, 19(11): 1497-1501(EI检索: 20085011776850)

77. 金占雷, 谭久彬, 张山, 王雷. 离焦激光直写的线宽稳定方法. 光学学报. 2008, 28(9): 1730-1734(EI检索: 20084211646724)

78. 张慧, 丁雪梅, 谭久彬. 基于折/衍混合原理的长焦深成像物镜消色差方法. 光学精密工程. 2008, 16(10): 1810-1814(EI检索: 20085211812917)

79. 敖磊, 谭久彬, 崔继文, 康文静. 一种快速高精度激光CCD自准直仪圆目标中心的定位方法. 光学学报. 2007, 27(2): 253-258(EI检索: 20071610557575)

80. 崔继文, 谭久彬, 敖磊, 康文静. 约束抽样Hough变换的光纤端面精确定位. 光学精密工程. 2007, 15(1): 9-15(EI检索: 20071310513496)

81. 刘彦, 谭久彬, 王雷. 差动电磁作动器的超大型光学仪器隔振基础的主动控制机理. 光学精密工程. 2007, 15(10): 1602-1608(EI检索: 20074610915885)

82. 陈浩, 谭久彬, 刘俭. 基于激光实时跟踪测量的航天器编队相对位置测量方法. 宇航学报. 2007, 28(4): 908-913(EI检索: 20073610802628)

83. Tan Jiubin, Liu Jian. Recent advances in our research on ultrahigh resolution laser confocal microscopy. Key Engineering Materials. 2007, 381-382: 11-14(EI检索: 20082911383838)

84. Cui Jiwen, Tan Jiubin, Shi Qian. Measurement method for micro-cavity based on improved MAP algorithm. Key Engineering Materials. 2007, 381-382: 191-194(EI检索: 20082911383883)

85. 敖磊, 谭久彬, 崔继文, 康文静. 激光CCD自准直仪圆目标中心抗噪声精确定位方法. 中国激光. 2006, 33(12): 16039-1614(EI检索: 20070510400427)

86. 陆振刚, 谭久彬, 金鹏, 刘俭. 高通光率金属网栅屏蔽效率分析的等效折射率模型.光学精密工程. 2006, 14(6): 949-954(EI检索: 20071710571809)

87. 陈浩, 谭久彬.一种用于光电目标跟踪的非线性滤波算法. 光学精密工程. 2006, 14(5): 917-921(EI检索: 20065110317480)

88. 陈浩, 谭久彬. 光束入射角对角锥合作目标激光测距的影响. 光电子•激光. 2006, 17(8): 986-988(EI检索: 20064310201099)

89. 黄向东, 谭久彬. 阵列式共焦显微系统超分辨特性的研究. 光电子•激光. 2006, 17(1): 28-31(EI检索: 2006169831234)

90. 陆振刚, 谭久彬, 刘永猛, 刘俭, 张慧. 倾斜入射条件下衬底对金属网栅屏蔽特性的影响. 光学精密工程. 2006, 14(3): 360-367(EI检索: 20063410083087)

91. 王雷, 谭久彬, 刘玉涛. 超磁致伸缩体内涡流效应有限元分析. 光学精密工程. 2006, 14(3): 445-449(EI检索: 20063410083088)

92. 敖磊, 谭久彬, 崔继文, 康文静. 激光CCD二维自准直仪中圆目标中心精确定位算法. 光学精密工程. 2005, 13(6): 668-673(EI检索: 2006099733214)

93. 刘俭, 谭久彬, 赵晨光, 单明广. 准直光束高斯特征对直写光斑强度的影响. 中国激光. 2005, 32(12): 1627-1630(EI检索: 2006109747285)

94. 陈洪芳, 丁雪梅, 钟志, 谭久彬. 激光外差干涉检偏器旋转误差对非线性误差的影响. 中国激光. 2005, 32(9): 1281-1285(EI检索: 2005429423788)

95. 钟志, 谭久彬, 陈洪芳, 单明广. 一种激光外差干涉非线性误差新颖测量方法. 光电子•激光. 2005, 16(7): 817-820(EI检索: 2005369347090)

96. 崔继文, 谭久彬. 基于约束抽样Hough变换的圆轮廓快速检测技术. 哈尔滨工业大学学报. 2005, 36(10): 1394-1396(EI检索: 2005489517151)

97. 黄向东, 谭久彬. 激光共焦显微图像多尺度边缘提取算法研究. 光电子•激光. 2005, 16(4): 458-461(EI检索: 2005249160752)

98. Xue Zi, Tan Jiubin, Zhao Weiqian, Zhang Heng. Alterable interval optical-electronic autocollimation method for straightness measurement of precision guide. Chinese Journal of Mechanical Engineering. 2005, 18(3): 457-460(EI检索: 2005439438640)

99. Qiao Yujing, Tan Jiubin, Lang Zhiguo. The research of basing on simulative compensator and two-wavelength phase shifting interferometry for testing large departure aspheric surface. SPIE: 20th Congress of the International Commission for Optics. 2005, 6024: 60240Y(EI检索: 2006129771122)

100. 钟志, 谭久彬, 马洪文, 陈洪芳. 激光外差干涉快速超精密测量模型研究. 光学学报. 2005, 25(6): 791-794(EI检索: 2005289208551)

101. 叶树亮, 谭久彬. 具有纳米分辨力二维超精密定位系统的研制．哈尔滨工业大学学报. 2005, 37(11): 1427-1475(EI检索: 2006029637286)

102. 钟志, 谭久彬. 激光干涉快速超精密测量残余累计误差研究. 光电子•激光. 2005, 16(3): 328-331(EI检索: 2005199092529)

103. 马洪文, 谭久彬, 杨文国, 尹静. 薄片式挠弹性器件漫反射激光三角法频率测量. 光电子•激光. 2004, 15(7): 849-852(EI检索: 2004448438477)

104. 马洪文, 谭久彬, 赵维谦. 基于单神经元PID解耦的激光漂移量控制方法. 光电子•激光. 2004, 15(9): 1095-1098(EI检索: 2004518734000)

105. 赵维谦, 邱丽荣, 丁雪梅, 谭久彬. 被测物离焦状态对共焦显微系统横向分辨特性的影响. 光电子•激光. 2004, 15(8): 963-966(EI检索: 2004488687363)

106. 赵维谦, 谭久彬, 邱丽荣, 章雷. 激光光束特定方向准直方法与技术. 光电子•激光. 2004, 15(1): 61-64(EI检索: 2004238201466)

107. 叶树亮, 谭久彬. 基于动态阿贝原则的高精度激光深孔孔径测量. 光电子•激光. 2004, 15(8): 971-974(EI检索: 2004488687365)

108. 张建寰, 谭久彬. 应用共焦显微镜原理测量倾斜工程表面. 光学学报. 2003, 23(4): 446-450(EI检索: 2003327584949)

109. 邹丽敏, 杨文国, 金国良, 谭久彬. 基于激光三角法的挠性器件动态摆频测试系统. 光电子•激光. 2003, 14(12): 1315-1318(EI检索: 2004248214192)

110. 谭久彬, 张杰. 微型差动式共焦自聚焦光聚焦探测系统. 光学学报. 2003, 23(2): 202-206(EI检索: 2003237499686)

111. 谭久彬, 张杰. 自聚焦共焦式微小内腔体探测技术. 中国激光. 2003, 30(2): 175-178(EI检索: 2003257514221)

112. 张建寰, 谭久彬. 表面倾斜对共焦显微测量轴向响应的影响. 光电子•激光. 2002, 13(12): 1272-1275(EI检索: 2003187454232)

113. 谭久彬, 张杰. 自聚焦透镜的三维相干成像特性分析. 光学学报. 2002, 22(12): 1484-1487(EI检索: 2003187454244)

114. 谭久彬, 张杰. 自聚焦共焦光纤传感系统的相干传递函数. 光电子•激光. 2002, 13(7): 714-716(EI检索: 2002427145325)

115. 张杰, 谭久彬. 自聚焦共焦光纤传感器轴向分辨率的影响因素. 光电子•激光. 2002, 13(8): 818-821(EI检索: 2002457195000)

116. 谭久彬, 张杰. 自聚焦共焦探测系统轴向分辨率的影响因素. 光电子•激光. 2002, 13(6): 593-596(EI检索: 2002427142229)

117. 张杰, 谭久彬. 自聚焦共焦式微型探测系统的研究. 光电子•激光. 2002, 13(4): 374-377(EI检索: 2002407123996)

118. 张杰, 谭久彬. 共焦自聚焦光纤传感器回波干扰抑制方法分析. 光电子•激光. 2002, 13(2): 114-116(EI检索: 2002397110139)

119. 张杰, 谭久彬. 微型反射式共焦光纤传感器研究. 光电子•激光. 2002, 13(1): 1-4(EI检索: 2002397110042)

120. Qi Naiming, Liu Dun, Tan Jiubin. Conditions analysis approach to infinite stiffness for an active control aerostatic bearing. Journal of Harbin Institute of Technology. 2001, 25(2): 147-151(EI检索: 2001506760600)

121. 徐烈, 谭久彬. 经线法球度测量的评定方法研究. 哈尔滨工业大学学报. 2001, 33(5): 620-624(EI检索: 2002166917914)

122. 赵维谦, 谭久彬, 张杰, 杨文国. 球体轮廓及半径非接触超精密测量方法研究. 哈尔滨工业大学学报. 2001, 33(2): 140-143(EI检索: 2001526779414)

123. 王富生, 谭久彬. 差动共焦式纳米级光聚焦探测系统的研究. 光学技术. 2001, 27(3): 232-234 (EI检索: 2002016819026)

124. Tan Jiubin, Zhao Weiqian. Study on some key technique of large scale laser measuring machine. Journal of the Chinese Society of Mechanical Engineers. 2000, 21(4): 391-398(EI检索: 2000485347815)

125. Sun Tong, Tan Jiubin. Compensation harmonics in multi-step error separation with comprehensive method. Journal of the Chinese Society of Mechanical Engineers. 1996, 17(6): 549-553(EI检索: 1997143518277)

126. Tan Jiubin, Qiang Xifu, Ding Xuemei. A superprecision measuring method and the corresponding measuring system for error movement of instrument spindles. Proceedings of the International Conference on Industrial Electronics, Control and Instrumentation. 1991, 3: 2449-2454(EI检索: 1993010636559)

127. 崔继文, 谭久彬. 基于变窗口浮动阈值的调制结构光三维测量方法. 计量学报. 2008, 29(10): 88-92(EI检索: 20084511683516)

128. 金占雷, 谭久彬, 刘玉涛, 王雷, 张山. 极坐标激光直写径向漂移理论研究. 光电工程. 2008, 35(7): 38-43(EI检索:20083411471670)

129. 乔玉晶, 谭久彬, 王伟波. 子孔径干涉拼接测量非球面的模型分析. 仪器仪表学报. 2007, 28(10): 1880-1885(EI检索: 20074510910291)

130. 崔继文, 谭久彬, 刘丹丹. 基于MAP与POCS混合算法的微内腔体尺寸测量方法. 计量学报. 2006, 27: 54-57(EI检索: 20064810278746)

131. 崔继文, 谭久彬, 敖磊, 康文静. 模糊控制与图像处理技术实现的聚焦方法. 光电工程. 2005, 32(6): 12-16(EI检索: 2005299226448)

132. 崔继文, 谭久彬. 基于Zernike矩的亚像素边缘定位算法. 光学技术. 2005, 31(5): 779-782(EI检索: 2005439426498)

133. 金鹏, 谭久彬. 基于UV-LIGA技术的微型火箭及微型动力系统技术. 中国机械工程. 2005, 16(14): 1233-1234 (EI检索: 2005349312891)

134. 钟志, 谭久彬, 陈洪芳, 单明广. 偏振分光镜传输系数不等对非线性误差的影响. 光电工程. 2005, 32(9): 27-30(EI检索: 2005449453993)

135. 钟志, 谭久彬, 陈洪芳. 光学倍频影响激光外差干涉测量精度的机理. 光电工程. 2005, 32(7): 27-29(EI检索: 2005339305163)

136. 熊木地, 谭久彬. 激光直写设备超精密平稳驱动技术的研究. 微细加工技术. 2003, 4: 33-38(EI检索: 2004098043912)

137. 金鹏, 谭久彬, 刘岩. PDMS微小流路微加工技术的研究. 微细加工技术. 2001, 3: 31-36(EI检索: 2001556802217)

138. 张杰, 谭久彬. 基于共焦原理的反射式自聚焦光纤传感技术研究. 光子学报. 2001, 30(11): 1361-1365(EI检索: 2002056844062)

139. 赵维谦, 谭久彬, 刘冰峰, 杨文国. 改善调幅式传感器测量电路精度的措施. 仪器仪表学报. 2001, 22(3): 247-250(EI检索: 2001436707740)

140. 孙涛, 谭久彬, 董申. 基于原子力显微镜扫描的金刚石刀具纳米刃口轮廓测量方法研究. 仪器仪表学报. 2000, 21(1): 54-57(EI检索: 2000095313175)

141. 贾宇辉, 谭久彬. 超磁致伸缩材料微位移驱动系统的研究. 仪器仪表学报. 2000, 21(1): 38-41(EI检索: 2000095313171)

142. 贾宇辉, 谭久彬. 超磁致伸缩微位移驱动器的研究. 微细加工技术. 2000, 2: 70-74. (EI检索: 2000095317493)

143. 赵维谦, 谭久彬, 杨文国. 基于两步法超精密圆度仪误差分离系统. 中国机械工程. 2000, 11(11): 1206-1208(EI检索: 2001035574004)

144. 贾宇辉, 谭久彬. 基于超磁致伸缩材料的微位移驱动器特性研究. 中国机械工程. 1999, 10(11): 1213-1215(EI检索: 2000045123275)

145. 孙涛, 谭久彬, 董申. 天然金刚石刀具的研磨及其刃口半径检测技术. 制造技术与机床. 1998, (8): 24-26(EI检索: 1998104422309)

146. 赵维谦, 杨文国, 谭久彬, 赵熙萍. 高精度七米激光测长机的误差补偿技术. 哈尔滨工业大学学报. 1997, 29(4): 49-52(EI检索: 1997113933513).

147. Tan Jiubin, Li Dongsheng. Applying the nanometer degree capacitance sensor to the super-high-precision measurement of roundness. Journal Wuhan University of Technology. 1995, (4): 375-381(EI检索: 1994122495636)

148. Wang Lei, Tan Jiubin, Zhang Shan. The high resolution actuator based on the giant magnetostriction. SPIE: 9th International Symposium on Laser Metrology. 2008, 7155: 71552Y(ISTP检索: BIN26)

149. Cui Jiwen, Tan Jiubin. Fast auto-focusing based on partial image characteristics. SPIE: 9th International Symposium on Laser Metrology. 2008, 7155: O1550-O1550(ISTP检索: BIN26)

150. Cui Jiwen, Tan Jiubin, Zhou Yan, Zhang Hui. Improvement of vision measurement accuracy using zernike moment based edge location error compensation model. Proceedings of the 4th International Symposium on Instrumentation Science and Technology. Journal of Physics: Conference Series. 2006, 48: 1353-1360(ISTP检索: BGU20)

151. Zhi Zhu, Tan Jiubin, Huang Xiangdong, Chen Fangfang. Algorithms for high-speed generating CRC error detection coding in separated ultra-precision measurement. Proceedings of the 4th International Symposium on Instrumentation Science and Technology. Journal of Physics: Conference Series. 2006, 48: 228-232(ISTP检索: BGU20)

152. Gao Yulong, Jin Peng, Liu Nan, Tan Jiubin. The optimized design of accelerometer for the UV-LIGA process. Proceedings of the 4th International Symposium on Instrumentation Science and Technology. Journal of Physics: Conference Series. 2006, 48: 1465-1470(ISTP检索: BGU20)

153. Wang Lei, Tan Jiubin, Liu Yutao. Research on giant magnetostrictive micro-displacement actuator with self-adaptive control algorithm. Proceedings of the 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics: Conference Series. 2005, 13: 446-449(ISTP检索: BEW74)

154. Liu Jian, Tan Jiubin, Zhao Chenguang, Shan Mingguang, Wang Dongfang. Impact on diffraction efficiency of binary optical elements for spot exposure superposing ratio. Proceedings of the 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics: Conference Series. 2005, 13: 418-421(ISTP检索: BEW74)

155. Ye Shuliang, Tan Jiubin. Gate effect analysis and compensation method of the multi-period synchronous frequency discrimination. Proceedings of the 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics: Conference Series. 2005, 13: 362-365(ISTP检索: BEW74)

156. Yao Shaoming, Tan Jiubin. Ultra-precision rotating reference based on self-acting external-pressure complex action principle. Proceedings of the 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics: Conference Series. 2005, 13: 137-142(ISTP检索: BEW74)

157. Cui Jiwen, Tan Jiubin, Ao Lei, Kang Wenjing. Optimized algorithm of laser spot center location in strong noise. Proceedings of the 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics: Conference Series. 2005, 13: 312-315(ISTP检索: BEW74)

158. Ye Shuliang, Tan Jiubin. Input equivalent drift value compensation method for zero-drift in ultra-precision capacitance displacement sensor. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 1: 727-731(ISTP检索 : BBD52)

159. Zhong Zhi, Tan Jiubin, Feng Zhengde, Zhao Weiqian. Study on heterodyne interferometric in fast ultra-precise position. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 2: 905-908(ISTP检索: BBD66)

160. Wang Lei, Tan Jiubin. Digital drive method of giant magnetostrictive micro-actuator. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 3: 474-478(ISTP检索: BBE07)

161. Huang Xiangdong, Tan Jiubin. Confocal microscope for 3D surface topography based on laser array. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 2: 1309-1313(ISTP检索: BBD66)

162. Huang Xiangdong, Tan Jiubin. A fast approach to edge detection for confocal microscopic image. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 2: 139-143(ISTP检索: BBD66)

163. Cui Jiwen, Tan Jiubin. An auto-focusing method based on image processing technique. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 2: 99-103(ISTP检索: BBD66)

164. Ma Hongwen, Tan Jiubin. Double laser beam phase modulating alignment method. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 2: 827-830(ISTP检索: BBD66)

165. Xue Zi, Tan Jiubin, Zhang Heng, Zhao Weiqian. Theoretical and experimental analyses of Gaussian filtering for ultraprecision circular profile. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 1: 421-425(ISTP检索: BBD52)

166. Xue Zi, Tan Jiubin, Zhao Weiqian, Zhang Heng. Amplitude frequency analyses of Gaussian filtering for ultraprecision circular profile. Proceedings of the 3rd International Symposium on Instrumentation Science and Technology. 2004, 1: 388-392(ISTP检索: BBD52)

167. Liu Jian, Tan Jiubin, Lu Zhengang, Zhang Hui. Modified energy absorption model in photoresist based on dielectric absorption constant. Proceedings of the 3rd International symposium on Instrumentation Science and Technology. 2004, 1: 1141-1144(ISTP检索: BBD66)

168. Liu Jian, Tan Jiubin, Yin Jing, Shan Mingguang. Ultra precise measurement for rigidity of self-acting air bearing based on triangular method. Proceedings of the 3rd International symposium on Instrumentation Science and Technology. 2004, 3: 778-782(ISTP检索 : BBD66)

169. Wang Fusheng, Tan Jiubin, Zhang Jie. A high-precision capacitance sensor based on direct digital synthesis Technology. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 370-375 (ISTP检索: BP39J)

170. Tan Jiubin, Jin Peng. Microchip lab for medical purpose. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 576-579(ISTP检索: BP39J)

171. Jia Yuhui, Tan Jiubin, Luo Jin. Application and study of giant magnetostrictive actuator in subnanometer displacement feed. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 540-544(ISTP检索: BP39F)

172. Zhao Weiqian, Tan Jiubin, Luo Jin. Digital phase sensitivity detection method for faint signal in a noise circumstance. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 257-261(ISTP检索: BP39J)

173. Pan Runling, Tan Jiubin, Zhao Weiqian. A study on harmonics suppression in roundness measurement. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 2, 162-166(ISTP检索: BAP16)

174. Sun Tao, Tan Jiubin, Li JH, Dong Shen. Research on 3D measuring of nanometer sharp profile. Proceedings of the 1st International Symposium on Instrumentation Science and Technology. 1999, 580-584 (ISTP检索: BP39J)

175. Sun Tao, Tan Jiubin, et al. Study on three dimension measuring technology of cutting edges basing on the micro-mechanical probe theory. Proceedings of the 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology. 1999, 2, 192-195(ISTP检索: BAP16)

176. Tan Jiubin, Pan Runling. A new error separation technique used in nanometer accuracy roundness measurement. Proceding of the 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology. 1999, 2, 196-199(ISTP检索: BAP16)

177. 马洪文, 姚绍明, 谭久彬. 超声波电机驱动大行程柔性导轨设计. 现代制造工程. 2004, (12): 1671-3133

178. 赵维谦, 谭久彬, 马洪文, 邹丽敏. 漂移量反馈控制式激光准直方法. 光学学报. 2004, 24(3): 373-378

179. 谭久彬, 李东升. 超精密仪器工程关键技术研究若干进展. 中国计量学院学报. 2003, 14(2): 83-88

180. 于涌巍, 谭久彬. 利用滑动窗口法改善测量信号的示值稳定性. 哈尔滨工业大学学报. 2002, 34(5): 663-666

181. Jin Peng, Tan Jiubin, Sun Kai. Microbiosensors for determination of glucose in the blood sample. Journal of Harbin Institute of Technology. 2002, 9(1): 99-101

182. 杨亚非, 谭久彬, 邓正隆. 惯导系统初始对准技术综述. 中国惯性技术学报. 2002, 10(2): 68-72

183. 齐乃明, 谭久彬. 基于自主气体轴承的大型光电精密仪器回转基准技术的研究. 光电工程. 2002, 29: 32-37

184. Tan Jiubin, Zhang Jie. Study on the principle of a new self-focusing optical sensor. Proceeding of the International Symposium on Measurement Technology & Intelligent Instrument. 2001: 313-316

185. 谭久彬, 赵维谦, 杨文国. 改善多步法谐波抑制的新方法—鉴相法. 中国机械工程. 2001, 12: 161-162

186. 谭久彬, 王富生. 基于数字合成技术的电容式位移传感器研究. 仪器仪表学报. 2001, 22(2): 181-185

187. 谭久彬, 张杰. 自聚焦透镜在传感应用中的研究进展. 光电子•激光. 2001, 12(9): 984-988

188. 齐乃明, 刘暾, 谭久彬. 自主式静压气体轴承实现无穷刚度的条件分析. 南京理工大学学报. 2001, 25(2): 147-151

189. 赵维谦, 谭久彬, 房成林, 何葳. 弹挠性零件刚度系数测量方法. 航天工艺. 2001, (1): 33-36

190. 王富生, 谭久彬. 表面微观轮廓的高分辨率光学测量方法. 光学精密工程. 2000, 8(4): 309-315

191. 贾宇辉, 谭久彬. 超磁致伸缩微位移驱动器在纳米测量中应用的研究. 压电与声光. 2000, 22(2): 127-130

192. 贾宇辉, 谭久彬. 超磁致伸缩驱动器及有限元分析方法的研究. 光学精密工程. 2000, 8(2): 161-164

193. 赵维谦, 谭久彬, 常承, 孙彤. 超精圆度仪全自动误差分离装置的研制. 仪器仪表学报. 2000, 21(2): 203-205

194. 谭久彬. 超精密测量技术与仪器工程研究中的几个热点问题. 中国机械工程. 2000, 11(3): 257-261

195. 赵维谦, 谭久彬, 杨文国, 于涌巍. 数字相敏技术及其在纳米级调幅式传感器中的运用. 第一届全国纳米技术与应用学术会议论文集. 2000: 6-9

196. 邓春梅, 周军, 陈吉红, 谭久彬. 国标圆度仪数字滤波器传输特性逼近方法的研究. 仪器仪表学报. 2000, 21(5): 521-524

197. 孙涛, 谭久彬, 董申. 压电陶瓷微驱动器用于超精定位的技术研究. 压电与声光. 1999, 21(6): 493-497

198. 孙涛, 谭久彬, 董申. 用原子力显微镜扫描测量金刚石刀具刃口半径. 工具技术. 1999, (1):30-32

199. 赵维谦, 谭久彬. 高精度、高稳定性、宽范围回转体自动定心系统的研究. 仪器仪表学报. 1999, 20(5): 534-536

200. Tan Jiubin, Pan Runling. Research on phase¬-detected error separation technique. Proceeding of the 6th ISMQC IMEKO Symposium. 1998, 651-655

201. Tan Jiubin, Zhao Weiqian. The study on the error separation technique for the position errors between datums in the cylindricity measurement of large scale workpieces. Proceeding of the International Symposium on Measurement Technology & Intelligent Instrument. 1998, 234-238

202. 谭久彬, 赵维谦, 杨文国. 高精度七米激光测长机及其计量管理系统. 仪器仪表学报. 1997, 18(3): 322-325

203. Sun Tong, Tan Jiubin, Qiang Xifu. Xerification of existence of harmonic suppression in error separation by prony spectrum analysis. Journal of Harbin Institute of Technology. 1997, E4(4):14-19

204. 李东升, 王伟杰, 谭久彬, 赵维谦. 圆柱度仪测量基准的误差分离技术. 东北林业大学学报. 1997, 25(2): 45-48

205. 孙彤, 谭久彬, 强锡富, 张善钟. 主轴回转误差Prony谱模型. 计量学报. 1997, 18(3): 211-215

206. Chen Chao Kuang, Tan Jiubin, Tang Yuyong. An investigation on enveloping sphere and their correlative problems. Proceeding of the Asia-Pacific Symposium on Instrumentation. 1997, 187-201

207. Tan Jiubin, Huang Chuxiong. A new tape of dynamic calibrating technique for super-precision groroter measuring instrument. Proceeding of the 4th International Conference on Automation Technique.1996, 705-711

208. Tan Jiubin, Li Dongsheng, W. J. Wang. Study of large scale instrument for cylindricity measurement. Proceeding of the International Symposium on Measurement Technology & Intelligent Instrument. 1996, 180-184

209. Tan Jiubin, Ding Xuemei. Error separation technique benefitted by secondary messages. Proceeding of the International Symposium on Measurement Technology & Intelligent Instrument. 1996, 51-54

210. 孙彤, 谭久彬, 张善钟. 主轴回转误差的新型光学测量方法. 计量技术. 1995, (8): 169-172

211. 赵维谦, 谭久彬. 高精度七米激光测长机误差分析. 计量技术.1995, (8): 164-168

212. 谭久彬, 李东升, 强锡富, 王伟杰. 大型试件的精确定位方法与调控系统的研究. 计量学报. 1995, 16(2): 121-127

213. 谭久彬, 李东升, 赵维谦, 杨文国. 纳米级位移传感器的系统补偿方法. 仪器仪表学报. 1995, 16(S1): 170-175

214. Tan Jiubin, Li Dongsheng, Huang Chuxiong. Dynamic calibrating technique for super-precision gyrorotor measuring instrument. Journal of Harbin Institute of Technology. 1995, E2(2): 15-20

215. 赵维谦, 谭久彬. 高精度七米激光测长机光路布置的研究. 计量技术. 1995, 8: 173-178

216. 谭久彬. 精密测量中的误差补偿技术. 哈尔滨工业大学出版社, 1995

217. Li Dongsheng, Tan Jiubin, Qiang Xifu, Yang Wenguo, Zhao Xiping. Compensating method of zero drift for magneto-sensing torque sensors. SPIE: Measurement Technology and Intelligent Instruments. 1993, 2101: 257-262

218. Li Dongsheng, Tan Jiubin, Qiang Xifu, Yang Wenguo, Zhao Xiping. Applying the adjusting method of least squire to obtain original data of flatness error. SPIE: Measurement Technology and Intelligent Instruments. 1993, 2101: 173-179

219. Tan Jiubin, Li Dongsheng, Qiang Xifu, Zhao Xiping, Yang Wenguo. Error separation technique of two points and two setting method and application in contactless automatic measurement. SPIE: Measurement Technology and Intelligent Instruments. 1993, 2101: 452-457

220. Tan Jiubin, Li Dongsheng, Qiang Xifu, Yang Wenguo, Zhao Hai. Statistical recognition of offset components and evaluation of sphericity error for ultra-high-precision sphere. SPIE: Measurement Technology and Intelligent Instruments. 1993, 2101: 1245-1251

221. Tan Jiubin, Li Dongsheng, Qiang Xifu. The least squire circle model and parametric estimation method for the super- precision measurement of circle contour. Proceeding of the International Conference on Industrial Electronics, Control, and Instrumentation. 1992, 2: 813-817

222. Tan Jiubin, Li Dongsheng, Qiang Xifu. Automatic precise setting system of round workpiece on large-scale precision instrument. Proceeding of MICONEX. 1992, 282-287

223. Tan Jiubin, Qiang Xifu, Ding Xuemei. Clinical measuring system for the form and position errors of circular workpieces using optical fiber sensors. SPIE: International Conference on Optical Fibre Sensors in China. 1991, 1572:552-557

224. Tan Jiubin, Qiang Xifu, Ding Xuemei. A high accuracy method for eccentric component eliminating and parameter self adjusting eliminating method. Proceeding of the 8th International Symposium Artificial Intelligence based Measurement and Control. 1991, 467-473

225. Tan Jiubin, Qiang Xifu, Ding Xuemei. A high precision and multi-adaptability computerized processing system for measuring Instrument. Proceedings of the 8th International Symposium Artificial Intelligence based Measurement and Control. 1991, 463-466

226. Tan Jiubin, Qiang Xifu, Ding Xuemei. The distortion of display profiles in roundness measurement and the method for correcting amplitude distortion and phase error. Proceedings of MICONEX. 1990, 370-375

227. Tan Jiubin, Qiang Xifu, Ding Xuemei. Synthetical analysis of circular contour characteristics and design of optimal digital filter series with arbitrary band width. Proceedings of MICONEX. 1990, 330-334

228. 谭久彬. 圆轮廓特征综合分析的探讨与测量分析系统的研究. 哈尔滨工业大学学报. 1988, (1): 83-89

在“超精密”世界中潜心攻关